Pool fencing across Bourke that meets NSW barrier law: correct height, self-closing gate and a clear non-climbable zone.
A pool fence is the single most important safety feature on any Yantabulla property with a pool, and in New South Wales it is enforced by law under AS 1926.1. The standard is precise: the barrier must be a minimum of 1200mm high, the gap at the bottom cannot exceed 100mm, vertical gaps are capped at 100mm, and any gap between horizontal rails on a climbable face is restricted so the fence cannot be scaled. The non-climbable zone, a 900mm arc kept clear of footholds inside the barrier, is one of the most commonly failed items, so we plan the fence line to keep taps, light fittings, planter boxes and furniture outside it. Gates must be self-closing and self-latching, swing away from the water, and carry the latch high or shrouded against little hands. For Bourke homes we install frameless glass for an unobstructed view, semi-frameless glass as a mid-range choice, and tubular aluminium where a tough, cost-effective barrier suits the Far West and Orana setting. Each Pool Fencing & Safety Barriers starts with a site measure to position the barrier correctly against the dwelling, windows and boundaries, followed by footings engineered for the local soil conditions and panels fixed precisely to spec. We also bring older fences up to current rules, since the standard has tightened over the years and many existing barriers no longer comply. To finish, the Pool Fencing & Safety Barriers includes the inspection and the certification needed for the NSW Swimming Pools Register, the statewide record every pool must appear on. You end up with a barrier around your Yantabulla pool that is safe, certified and built to last.
Bespoke concrete pools for Yantabulla, with infinity edges, beach entries and split levels that prefabricated shells simply cannot match.
Fast, low-maintenance fibreglass pools craned into place for Yantabulla homes, and often swim-ready within one to two weeks.
Compact plunge pools that bring deep, cooling water to small Yantabulla yards, terraces and tight courtyards.
Custom concrete lap pools sized to the exact length and width of your Bourke block and boundary.
Bespoke concrete wet-edge pools engineered for raised and sloping sites right across the Bourke area.
Courtyard pools for Yantabulla, in concrete or fibreglass, low-maintenance and high on genuine usable value.
Reshape, refinish and modernise an older Yantabulla pool and bring it back up to current NSW compliance.
Resurfacing that restores a smooth, watertight and good-looking interior to a worn or stained Yantabulla pool.